Bucket Elevator (Henan, China)
Bucket elevator discharges materials centrifugally and feeds with them by draw-take out. Large quantity of feeding can be obtained through small distances of bucket. It embodies merits of a small occupational area, high efficiency of feeding, simple operation, convenience of installation and multipurpose applications.Features
1. Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feedback and excavating circumstance when materials are lifted, so invalid power is little.
2. Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.
3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.
4. The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinkling during feeding and discharging to reduce machinery abrasion. Application
Bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward sub polishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust cokemodeltypeTransmission capacity hopperDrive shaft rotation speed
(r/min)Most large degree conveying material
(r/min)Deep fightsShallow fightsDeep fightsShallow fightsD160Tape type 8311.10.653001601.047.5254.62~30.02D250Tape type21.611.8322.64002501.2547.5354.48~30.08D350Tape type 42257.875003501.2537.5454.3~30.3D450Tape type69.6481514.56404501.2537.5554.54~34TH160Tape type 6221.10.654001600.8747.5254.84~30.02TH250Tape type 184.108.40.206002500.8747.5354.84~30.08TH300Tape type 28165.24.45003001.2537.5404.66~30.16TH400Tape type 47.23010.5106004001.2537.5504.52~30